БЕСПЛАТНАЯ ДИАГНОСТИКА копировальной техники TOSHIBA

Toshiba e-Studio 357 Коды ошибок

Code: C010
Description: Main motor abnormality: The main motor is not rotating normally

Code: C040
Description: PFP motor abnormality: The PFP motor is not rotating normally

Code: C130
Description: Upper drawer tray abnormality: The upper drawer tray motor is not rotating or the upper drawer tray is not moving normally.

Code: C140
Description: Lower drawer tray abnormality: The lower drawer tray motor is not rotating or the lower drawer tray is not moving normally

Code: C150
Description: PFP upper drawer tray abnormality: The PFP upper drawer tray motor is not rotating or the PFP upper drawer tray is not moving normally

Code: C160
Description: PFP lower drawer tray abnormality: The PFP lower drawer tray motor is not rotating or the PFP lower drawer tray is not moving normal

Code: C180
Description: LCF tray-up motor abnormality: The LCF tray-up motor is not rotating or the LCF tray is not moving normally.

Code: C1A0
Description: LCF end fence motor abnormality: The LCF end fence motor is not rotating or the LCF end fence is not moving normally.

Code: C1B0
Description: LCF transport motor abnormality: The LCF transport motor is not rotating normally.

Code: C260
Description: Peak detection error: Lighting of the exposure lamp (white reference) is not detected when power is turned ON.

Code: C270
Description: Carriage home position sensor not turning OFF within a specified period of time: The carriage does not shift from its home position in a specified period of time.

Code: C280
Description: Carriage home position sensor not turning ON within a specified period of time: The carriage does not reach to its home position in a specified period of time.

Code: C290
Description: Scanner fuse blowout: 24V power for the scanning system is not supplied at the scanner warming-up after power-ON.

Code: C3D0
Description: EPU board memory overwriting error: The overwriting of the EPU board memory fails.

Code: C3D1
Description: EPU board memory new parts detection error: The EPU board detects the process unit as a new unit when the equipment is started in the normal mode.

Code: C3D2
Description: EPU board memory old parts detection error: The EPU board cannot detect the new process unit when the equipment is started in the EPU replacement mode ([7] + [START]).

Code: C410
Description: Thermistor or heater abnormality at power-ON: Abnormality of service call the thermistor is detected when power is turned ON or the temperature of the fuser roller does not rise in a specified period of time after power is turned ON.

Code: C430
Description: Thermistor abnormality after abnormality judgment: Abnormality of the thermistor is detected after a specified period of time has passed from power-ON (including ready state).

Code: C440
Description: Heater abnormality after abnormality judgment: The temperature of the fuser roller has exceeded the range of control or does not even reach the range.

Code: C450
Description: Thermistor abnormality during printing: Abnormality of the thermistor is detected during printing.

Code: C4C0
Description: Fuser unit new/old detection fuse abnormality

Code: C550
Description: RADF I/F error: Communication error has occurred between the RADF and the scanner.

Code: C551
Description: Document feeder model detection error: An optional document feeder that is not compatible to this equipment is installed.

Code: C570
Description: Communication error between Engine-CPU and IPC board

Code: C580
Description: Communication error between IPC board and finisher

Code: C5A0
Description: EEPROM communication abnormality (LGC board)

Code: C8E0
Description: ADF communication abnormality: The system has to be stopped because the control abnormality occurred

Code: C940
Description: Engine-CPU abnormality

Code: C970
Description: High-voltage transformer abnormality: Leakage of the main charger is detected.

Code: CA10
Description: Polygonal motor abnormality: The polygonal motor is not rotating normally.

Code: CA20
Description: H-Sync detection error: H-Sync detection PC board cannot detect laser beams.

Code: CB00
Description: Finisher not connected

Code: CB01
Description: Finisher communication error

Code: CB10
Description: Entrance motor abnormality: The entrance motor is not rotating normally. [MJ-1101/MJ-1106]

Code: CB11
Description: Buffer tray guide motor abnormality: The buffer tray guide motor is not rotating or the buffer tray guide is not moving normally. [MJ-1101/MJ-1106]

Code: CB12
Description: Buffer roller drive motor abnormality: The buffer roller drive motor is not rotating or the buffer roller is not moving normally. [MJ-1101/MJ-1106]

Code: CB13
Description: Finisher exit motor abnormality [MJ-1101/MJ-1106]

Code: CB14
Description: Paper holding arm motor abnormality [MJ-1101/MJ-1106]

Code: CB30
Description: Movable tray shift motor abnormality: The movable tray shift motor is not rotating or the movable tray is not moving normally. [MJ-1101] Movable tray shift motor abnormality: The movable tray shift motor or the movable tray does not work properly. [MJ-1032] Movable tray shift motor abnormality: The movable tray shift motor or the movable tray does not work properly. [MJ-1033]

Code: CB31
Description: Movable tray paper-full detection error: The actuator of the movable tray paper-full detection sensor does not move smoothly. [MJ-1101/MJ-1106]

Code: CB40
Description: Front alignment motor abnormality: The front alignment motor is not rotating or the front align/1106ment plate is not moving normally. [MJ-1101] Front alignment plate home position detection error: The detection of the home position ends abnormally because the front alignment plate has not worked properly. [MJ-1032/MJ-1033]

Code: CB50
Description: Stapler home position error: The stapler home position sensor does not work. [MJ-1101/MJ-1106] Stapler unit home position detection error: The detection of the home position of the stapler unit ends abnormally. [MJ-1032/MJ-1033

Code: CB51
Description: Stapler shift home position error: The stapler is not at the home position. [MJ-1101/MJ-1106] Stapler unit sliding home position detection error: The detection of the home position of the stapler unit sliding ends abnormally. [MJ-1032/MJ-1033]

Code: CB60
Description: Stapler shift motor abnormality: Stapler shift motor is not rotating or staple unit is not moving normally. [MJ-1101/MJ-1106]

Code: CB80
Description: Backup RAM data abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON. [MJ-1101/MJ-1106] EEPROM data abnormality: An error occurs during the writing of data into the EEPROM of the Finisher. [MJ- 1032/MJ-1033]

Code: CB81
Description: Flash ROM abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON. [MJ-1101/MJ-1106]

Code: CB82
Description: Finisher - Main CPU program error

Code: CB83
Description: Saddle Stitch Finisher - Main CPU program error [MJ- 1106]

Code: CB84
Description: Hole Punch Unit - Main CPU program error

Code: CB90
Description: Paper pushing plate motor abnormality: Paper pushing plate motor is not rotating or paper pushing plate is not moving normally.

Code: CB91
Description: Saddle Stitch Finisher flash ROM abnormality [MJ-1106]

Code: CB92
Description: Saddle Stitch Finisher RAM abnormality [MJ-1106]

Code: CB93
Description: Additional folding motor abnormality [MJ-1106]

Code: CB94
Description: Saddle transport motor abnormality [MJ-1106]

Code: CB95
Description: Stacker motor abnormality [MJ-1106]

Code: CBA0
Description: Front saddle stapler home position error: The stapler home position detection is abnormally operated and finished. [MJ-1106]

Code: CBB0
Description: Rear saddle stapler home position error: The stapler home position detection is abnormally operated and finished. [MJ-1106]

Code: CBC0
Description: Saddle Stitch Finisher side alignment motor (M15) abnormality: The alignment motor is not rotating or the alignment plate is not working properly. [MJ- 1106]

Code: CBE0
Description: Saddle Stitch Finisher folding motor (M17) abnormality: The folding motor is not rotating or the folding roller is not moving normally. [MJ-1106]

Code: CBF0
Description: Stacker motor (M9) abnormality : The stacker motor is not rotating. [MJ-1033]

Code: CC01
Description: A model not supporting the Finisher is connected. Note that this error is recognized in the communication converter and is output.

Code: CC02
Description: Stack exit roller nip home position detection error: The detection of the home position of the stack exit roller nip ends abnormally. [MJ-1032/MJ-1033]

Code: CC20
Description: Saddle communication error [MJ-1106]

Code: CC21
Description: The detection of the home position of the saddle stitch 3rd transport roller drive motor ends abnormally.

Code: CC22
Description: The detection of the home position of the saddle stitch stapler unit ends abnormally.

Code: CC30
Description: Stack transport motor abnormality: The stack transport motor is not rotating or the stack transport belt is not moving normally. [MJ-1101/MJ-1106]

Code: CC31
Description: Transport motor abnormality: The transport motor is not rotating or the stack transport roller -1 and -2 is not rotating normally. [MJ-1101/MJ-1106]

Code: CC41
Description: Paper holder cam home position abnormality: The paper holder cam is not at the home position. [MJ- 1101]

Code: CC51
Description: Sideways adjustment motor (M2) abnormality: Sideways adjustment motor is not rotating or puncher is not shifting normally. [MJ-1101/MJ-1106 (when MJ-6103 is installed)]

Code: CC52
Description: Skew adjustment motor (M1) abnormality: Skew adjustment motor is not rotating or puncher is not shifting normally. [MJ-1101/MJ-1106 (when MJ- 6103 is installed)]

Code: CC53
Description: An abnormality occurs in the punch waste full sensor.

Code: CC54
Description: Hole punch registration sensor detection error: An abnormality occurs in the hole punch registration sensor. [MJ-1032/MJ-1033]

Code: CC60
Description: Punch motor abnormality: Punch motor is not rotating or puncher is not shifting normally.]

Code: CC61
Description: Punch motor (M3) home position detection error: Punch motor is not rotating or puncher is not shifting normally. [MJ-1101/MJ-1106 (when MJ-6103 is installed)]

Code: CC71
Description: Punch ROM checksum error: Abnormality of checksum value on Hole punch controller PC board is detected when the power is turned on. [MJ-1101/MJ-1106 (when MJ-6103 is installed)]

Code: CC72
Description: Punch RAM read/write error: Abnormality of checksum value on Hole punch controller PC board is detected when the power is turned on. [MJ-1101/MJ-1106 (when MJ-6103 is installed)]

Code: CC80
Description: Rear alignment motor abnormality: The rear alignment motor is not rotating or the rear alignment plate is not moving normally. [MJ-1101/MJ-1106] Rear alignment plate home position detection error: The detection of the home position ends abnormally because the rear alignment plate has not worked properly. [MJ-1032/MJ-1033]

Code: CC91
Description: The detection of the home position of the gripper arm ends abnormality.

Code: CC92
Description: The movable tray exceeds its upper limit.

Code: CC93
Description: Knurled roller shift solenoid abnormality: An abnormality occurs in the knurled roller shift solenoid. [MJ-1032]

Code: CC94
Description: 1st fan motor abnormality: The 1st fan motor is locked abnormally. [MJ-1032]

Code: CCF1
Description: Tray safety switch abnormality - The tray safety switch turned on during tray operation (moving up or down).

Code: CDE0
Description: Paddle motor abnormality: The paddle motor does not rotate properly.

Code: CDF0
Description: Initialization error of the offset tray: The home position of the separator cannot be detected when the power is turned ON.

Code: CE00
Description: Communication error between finisher unit and puncher unit: Communication error between the finisher controller PC board and punch controller PC board.

Code: CE50
Description: Temperature/humidity sensor abnormality: The output value of this sensor is out of a specified range.

Code: CE90
Description: Drum thermistor abnormality: The output value of the drum thermistor-K is out of a specified range.

Code: CF10
Description: Communication module SRAM reading failure. [MJ-1101]

Code: E010
Description: Jam not reaching the exit sensor: The paper which has passed through the fuser unit does not reach the exit sensor.

Code: E020
Description: Stop jam at the exit sensor: The trailing edge of the paper does not pass the exit sensor after its leading edge has reached this sensor.

Code: E030
Description: Power-ON jam: The paper is remaining on the paper transport path when power is turned ON.

Code: E061
Description: Incorrect paper size setting for upper drawer: The size of paper in the 1st drawer differs from size setting of the equipment.

Code: E062
Description: Incorrect paper size setting for lower drawer: The size of paper in the 2nd drawer differs from size setting of the equipment.

Code: E063
Description: Incorrect paper size setting for PFP upper drawer: The size of paper in the 3rd drawer differs from size setting of the equipment.

Code: E064
Description: Incorrect paper size setting for PFP lower drawer: The size of paper in the 4th drawer differs from size setting of the equipment.

Code: E065
Description: Incorrect paper size setting for bypass tray: The size of paper in the bypass tray differs from size setting of the equipment

Code: E090
Description: HDD abnormality causes jam: Image data to be printed cannot be prepared.

Code: E110
Description: ADU misfeeding (Paper not reaching the registration sensor): The paper which has passed through ADU does not reach the registration sensor during duplex printing

Code: E120
Description: Bypass misfeeding (Paper not reaching the 1st transport sensor): The paper fed from the bypass tray does not reach the 1st transport sensor

Code: E130
Description: Upper drawer misfeeding (Paper not reaching the 1st transport sensor): The paper fed from the upper drawer does not reach the 1st transport sensor.

Code: E140
Description: Lower drawer misfeeding (Paper not reaching the 2nd transport sensor): The paper fed from the lower drawer does not reach the 2nd transport sensor.

Code: E150
Description: PFP upper drawer misfeeding (Paper not reaching the PFP upper drawer feed sensor): The paper fed from the PFP upper drawer does not reach the PFP upper drawer feed sensor.

Code: E160
Description: PFP lower drawer misfeeding (Paper not reaching the PFP lower drawer feed sensor): The paper fed from the PFP lower drawer does not reach the PFP lower drawer feed senso

Code: E190
Description: LCF misfeeding (Paper not reaching the LCF feed sensor): The paper fed from the LCF does not reach the LCF feed sensor.

Code: E200
Description: Upper drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st transport sensor.

Code: E210
Description: Lower drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st transport sensor

Code: E220
Description: Lower drawer transport jam (Paper not reaching the 1st transport sensor): The paper does not reach the 1st transport sensor after it has passed the lower drawer feed sensor.

Code: E270
Description: Bypass transport jam (paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st transport sensor.

Code: E280
Description: ADU transport jam (paper not reaching the registration sensor): The paper which has passed through ADU and the 1st transport sensor does not reach the registration sensor during duplex printing

Code: E300
Description: PFP upper drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st transport sensor.

Code: E310
Description: PFP upper drawer transport jam (Paper not reaching the 1st transport sensor): The paper does not reach the 1st transport sensor after it has passed the 2nd transport sensor.

Code: E320
Description: PFP upper drawer transport jam (Paper not reaching the 2nd transport sensor): The paper does not reach the 2nd transport sensor after it has passed the PFP upper drawer feed sensor.

Code: E330
Description: PFP lower drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st transport sensor.

Code: E340
Description: PFP lower drawer transport jam (Paper not reaching the 1st transport sensor): The paper does not reach the 1st transport sensor after it has passed the PFP lower drawer feed sensor.

Code: E350
Description: PFP lower drawer transport jam (Paper not reaching the 2nd transport sensor): The paper does not reach the 2nd transport sensor after it has passed the PFP upper drawer feed sensor.

Code: E360
Description: PFP lower drawer transport jam (Paper not reaching the PFP upper drawer feed sensor): The paper does not reach the PFP upper drawer feed sensor after it has passed the PFP lower drawer feed sensor.

Code: E3C0
Description: LCF transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st transport sensor.

Code: E3D0
Description: LCF transport jam (Paper not reaching the 1st transport sensor): The paper does not reach the 1st transport sensor after it has passed the 2nd transport sensor.

Code: E3E0
Description: LCF transport jam (Paper not reaching the 2nd transport sensor): The paper does not reach the 2nd transport sensor after it has passed the LCF feed sensor.

Code: E410
Description: Front cover open jam: The front cover has opened during printing.

Code: E420
Description: PFP side cover open jam: The PFP side cover has opened during printing.

Code: E430
Description: ADU open jam: The ADU has opened during printing

Code: E440
Description: Feed cover open jam: The feed cover has opened during printing.

Code: E450
Description: LCF side cover open jam: The LCF side cover has opened during printing.

Code: E480
Description: Bridge unit open jam: The bridge unit has opened during printing.

Code: E490
Description: Job separator cover open jam: The job separator cover has opened during printing.

Code: E491
Description: Offset tray cover open jam: The offset tray cover has opened during printing.

Code: E510
Description: Jam not reaching the ADU entrance sensor: The paper does not reach the ADU entrance sensor after it is switchbacked in the exit section.

Code: E520
Description: Stop jam in the ADU: The paper does not reach the ADU exit sensor after it has passed the ADU entrance sensor.

Code: E550
Description: Paper remaining jam on the transport path: The paper is remaining on the transport path when printing is finished (caused by a multiple paper feeding).

Code: E570
Description: Jam not reaching the reverse sensor: The paper which has passed the exit sensor does not reach the reverse sensor

Code: E580
Description: Stop jam at the reverse sensor: The trailing edge of the paper does not pass the reverse sensor after its leading edge has reached this sensor

Code: E712
Description: Jam not reaching the registration sensor: The original fed from the original feeding tray does not reach the registration sensor.

Code: E714
Description: Feed signal reception jam: The feed signal is received even no original exists on the original feeding tray.

Code: E721
Description: Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse side) or the reverse sensor (when scanning reverse side).

Code: E722
Description: Jam not reaching the exit sensor (during scanning): The original which passed the read sensor does not reach the exit sensor when it is transported from the scanning section to exit section.

Code: E724
Description: Stop jam at the registration sensor: The trailing edge of the original does not pass the registration sensor after its leading edge has reached this sensor.

Code: E725
Description: Stop jam at the read sensor: The trailing edge of the original does not pass the read sensor after its leading edge has reached this sensor.

Code: E731
Description: Stop jam at the exit sensor: The trailing edge of the original does not pass the exit sensor after its leading edge has reached this sensor.

Code: E860
Description: RADF jam access cover open: The RADF jam access cover has opened during RADF operation.

Code: E870
Description: RADF open jam: RADF has opened during RADF operation.

Code: E871
Description: Cover open jam in the read ready status: Jam caused by opening of the RADF jam access cover or front cover while the RADF is waiting for the scanning start signal from the equipment.

Code: E910
Description: Jam at the bridge unit transport sensor-1: The paper does not reach the bridge unit transport sensor-1 after it has passed the exit sensor.

Code: E920
Description: Stop jam at the bridge unit transport sensor-1: The trailing edge of the paper does not pass the bridge unit transport sensor-1 after its leading edge has reached the sensor.

Code: E930
Description: Jam at the bridge unit transport sensor-2: The trailing edge of the paper does not reach the bridge unit transport sensor-2 after its leading edge has reached the bridge unit transport sensor-1.

Code: E940
Description: Stop jam at the bridge unit transport sensor-2: The trailing edge of the paper does not reach the bridge unit transport sensor-2 after its leading edge has reached the bridge unit transport sensor-2.

Code: E950
Description: Jam not reaching the job separator transport sensor: The paper has passed through the exit sensor does not reach the job separator transport sensor.

Code: E951
Description: Stop jam at the job separator transport sensor: The trailing edge of the paper does not pass the job separator transport sensor

Code: E960
Description: Jam not reaching the offset tray transport sensor: The paper has passed through the exit sensor does not reach the offset tray transport sensor.

Code: E961
Description: Stop jam at the offset tray transport sensor: The trailing edge of the paper does not pass the offset tray transport sensor.

Code: E9F0
Description: Punching jam: Punching is not performed properly. [MJ-1025 (When MJ-6005 is installed)] Punching jam: Punching is not performed properly. [MJ-1024 (when MJ-6004 is installed)] [MJ-1101 (when MJ-6101 is installed)]

Code: EA10
Description: Paper transport delay jam: The paper which has passed the bridge unit does not reach the inlet sensor. Paper transport delay jam: The paper which has passed the bridge unit does not reach the inlet sensor. [MJ-1024/1031/1101]

Code: EA20
Description: Paper transport stop jam: The paper does not pass through the inlet sensor. [MJ-1025/MJ-1031] Paper transport stop jam: The paper has passed through the inlet sensor but does not reach or pass the feed path sensor or processing tray sensor. [MJ-1024] Paper transport delay jam: The paper which has passed through the inlet sensor does not reach the transport sensor. [MJ- 1101

Code: EA21
Description: Paper size error jam: Paper does not reach the sensor because the paper is shorter than spec.

Code: EA22
Description: Paper transport jam (Finisher paper punching edge detection sensor)

Code: EA23
Description: Paper transport jam (exit sensor)

Code: EA24
Description: Paper transport jam (between entrance and exit sensors)

Code: EA25
Description: Paper transport jam (after paper stack exit)

Code: EA26
Description: Paper transport jam (stop command request)

Code: EA27
Description: Paper transport jam (paper not inserted)

Code: EA28
Description: Paper transport jam (assisting arm operation delay)

Code: EA29
Description: Paper transport jam (stack transport delay)

Code: EA30
Description: Power-ON jam: Paper exists at the inlet sensor when power is turned ON.

Code: EA31
Description: Transport path paper remaining jam

Code: EA32
Description: Exit paper remaining jam

Code: EA40
Description: Door open jam: The Finisher is released from the equipment or any of the staple door and top cover is opened during printing. [MJ-1025] Door open jam: Any of the upper cover and front cover of the Finisher or any of the upper door and front door of the Hole Punch Unit is opened during printing. [MJ-1024] Joint open jam: The joint is released during printing or in the standby status. [MJ-1031]

Code: EA50
Description: Stapling jam: Stapling is not performed properly.

Code: EA60
Description: Early arrival jam: The inlet sensor detects the paper earlier than a specified timing

Code: EA70
Description: Stack delivery jam: It cannot deliver the stack of paper on the intermediary process tray to the stack tray. [MJ-1025] Stack slider home position error: The stack slider is not at the home position. [MJ-1031]

Code: EA80
Description: Stapling jam: Stapling is not performed properly. [MJ-1024]

Code: EA90
Description: Door open jam: The delivery cover or inlet cover has opened during printing [MJ-1024/MJ-1101].

Code: EAA0
Description: Power-ON jam: Paper exists at No.1 paper sensor, No. 2 paper sensor, No.3 paper sensor, vertical path paper sensor or delivery sensor when power is turned ON. [MJ-1024/MJ-1101]

Code: EAB0
Description: Saddle paper transport stop jam: The paper which passed through the inlet sensor does not reach or pass through the folding position sensor. [MJ-1025]

Code: EAC0
Description: Saddle transport delay jam: The paper which has reached the inlet sensor does not pass through this sensor. [MJ-1025/MJ-1024]

Code: EAD0
Description: Print end command time-out jam: The printing has not finished normally because of the communication error between the SYS board and LGC board at the end of printing.

Code: EAE0
Description: Receiving time time-out jam: The printing has been interrupted because of the communication error between the equipment and finisher when the paper is transported from the equipment to the finisher.

Code: EB30
Description: Ready time time-out jam: The equipment judges that the paper transport to the finisher is disabled because of the communication error between the equipment and finisher at the start of printing.

Code: EB50
Description: Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper.

Code: EB60
Description: Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper (redetection after no jam is detected at [EB50]).

Code: ED10
Description: Skew adjustment motor home position detection abnormality: The Skew adjustment motor is not at the home position. [MJ-1101 (when MJ-6101 is installed)]

Code: ED11
Description: Sideways adjustment motor home position detection error: The Sideways adjustment motor is not at the home position. [MJ-1101 (when MJ-6101 is installed)]

Code: ED12
Description: Shutter home position error: The shutter is not at the home position. [MJ-1101]

Code: ED13
Description: Front alignment plate home position error: The front alignment plate is not at the home position. [MJ- 1101]

Code: ED14
Description: Rear alignment plate home position error: The rear alignment plate is not at the home position. [MJ- 1101]

Code: ED15
Description: Paddle home position error: The paddle is not at the home position. [MJ-1101]

Code: ED16
Description: Buffer tray home position error: The buffer tray is not at the home position. [MJ-1101]

Code: F070
Description: Communication error between System-CPU and Engine- CPU

Code: F090
Description: SRAM abnormality on the SYS board

Code: F100_0
Description: HDD format error: Operation of HDD key data fails.

Code: F100_1
Description: HDD format error: Encryption key data of either the SYS board or the SRAM board for the SYS board are damaged.

Code: F100_2
Description: HDD format error: Encryption key data of both the SYS board and the SRAM board for the SYS board are damaged.

Code: F101
Description: The HDD cannot be connected (mounted) caused by a reason other than one described in the F101_0 through F101_3 errors.

Code: F101_0
Description: HDD connection error (HDD connection cannot be detected.)

Code: F101_1
Description: Root partition mount error (HDD formatting fails.): The HDD cannot be connected (mounted) caused by damage to the areas in which the program is mainly stored.

Code: F101_2
Description: Normal partition mount error (HDD normal partition mounting fails.): The HDD cannot be connected (mounted) caused by damage to areas other than those described in the F101_0 and F101_1 errors.

Code: F101_3
Description: Encryption partition mount error (HDD encryption partition mounting fails.): The HDD cannot be connected (mounted) caused by damage to the areas in which the key is stored.

Code: F102
Description: HDD start error: HDD cannot become ‘Ready’ state.

Code: F103
Description: HDD transfer time-out: Reading/writing cannot be performed in the specified period of time.

Code: F104
Description: HDD data error: Abnormality is detected in the data of HDD.

Code: F105
Description: HDD other error

Code: F106_0
Description: ADI-HDD error: Illegal disk replacement detected (ADIHDD Exchange to SATA-HDD)

Code: F106_1
Description: ADI-HDD error: HDD type detection error

Code: F106_2
Description: ADI-HDD error: ADI encryption key download operation error

Code: F106_3
Description: ADI-HDD error: ADI authentication Admin Password generation error

Code: F106_4
Description: ADI-HDD error: Authentication random number generation error

Code: F106_5
Description: ADI-HDD error: Authentication data transmission error

Code: F109_0
Description: Key consistency error: Consistency check operation error.

Code: F109_1
Description: Key consistency error: SRAM encryption AES key data damage.

Code: F109_2
Description: Key consistency error: Signature Check public key damage.

Code: F109_3
Description: Key consistency error: HDD encryption parameter damage.

Code: F109_4
Description: Key consistency error: license data damage.

Code: F109_5
Description: Key consistency error: Encryption key for ADI-HDD is damaged

Code: F109_6
Description: Key consistency error: Administrator password error for ADI-HDD authentication.

Code: F110
Description: Communication error between System-CPU and Scanner-CPU

Code: F111
Description: Scanner response abnormality

Code: F120
Description: Database abnormality: Database is not operating normally.

Code: F121
Description: Database abnormality (user information management database)

Code: F122
Description: Database abnormality (Message/Job log management database)

Code: F124
Description: Database abnormality : Database is not operating normally. (Language management database)

Code: F130
Description: Invaid MAC address

Code: F131
Description: Error due to damage to filtering setting file

Code: F140
Description: ASIC format error: ASIC formatting fails or memory acquiring fails when software is formatted.

Code: F200
Description: Data Overwrite option (GP-1070) disabled

Code: F350
Description: SLG board abnormality

Code: F400
Description: SYS board cooling fan abnormality

Code: F500
Description: HD partition damage

Code: F510
Description: Application start error

Code: F520
Description: Operating system start error

Code: F521
Description: Integrity check error

Code: F550
Description: Encryption partition error

Code: F600
Description: Software update error

Code: F700
Description: Overwrite error

Code: F800
Description: Date error

Code: F900
Description: Model information error

Code: F901
Description: Engine speed error: The speed information of the LGC board is damaged.

Code: F901_1
Description: Engine speed error: The speed information of the LGC board is damaged.